Bag Holder

DSC00001.JPG
640 x 480
DSC00002.JPG
640 x 480
DSC00003.JPG
640 x 480
Here is a bag holder that is easy to make out of scrap plywood. It works great as a shop trash can. The plywood bag holder is screwed down to a horizontal piece of wood. The "handles" of the plastic bag fit into four notches in the holder.
DSC00007.JPG
640 x 480
DSC00005.JPG
640 x 480
DSC00006.JPG
640 x 480
You may want to taper the notches to help prevent the bag from slipping out of the holder I used drywall screws to secure the holder to a cross support. The back notches can go all the way to the wood that supports the holder.


If you are interested in making a bag holder here is a drawing to get you started.